125 lines
4.3 KiB
Plaintext
125 lines
4.3 KiB
Plaintext
v1.3:
|
|
- ATX: fixed wrong status on weak sectors,
|
|
ignore the reserved bit on status byte
|
|
- save read only flag for each drive slot
|
|
- fixed format DD on mydos
|
|
- fixed input keys on sdrive control program for Atari 400/800
|
|
- better percom handling
|
|
- optimized blanker refresh
|
|
- added support for basic files(simple onefilers)
|
|
|
|
v1.2:
|
|
- touchscreen auto detection added
|
|
- usage without display
|
|
- fixed buffer overflow on tape blocks > 256 bytes
|
|
- support reading baud from CAS file
|
|
- added support for ILI9325 displays without scroll feature(willy)
|
|
- added support for RM68090 display(vladkvladk)
|
|
- added ATX support for ED images
|
|
- support DD and QD image creation on "New" button
|
|
- fixed bug format image on insert after "New" button cleared
|
|
- added a button ">>>", to quickly change current drive to next image
|
|
in directory
|
|
- added ATX motor start delay for more compatiblity
|
|
- honor read only flag of image file
|
|
|
|
v1.1:
|
|
- screen blanker only on main page
|
|
- fixed display bug after formatting new image
|
|
- scrolling filename optimized
|
|
- fixed bug on reinsert SDRIVE.ATR to D0:
|
|
- added multiline output for long filenames in filebrowser
|
|
|
|
v1.0:
|
|
- added an optional screen blanker after about 30 seconds idleing
|
|
- debouncing touchscreen calibration and signal green on press
|
|
- added config switch for 1050 mode for ATX files(else 810 mode by default)
|
|
- all drives could now be used for ATX files
|
|
- 810 firmware retry logic(ATX)
|
|
- fixed missing sector handling(ATX)
|
|
- fixed issue with double tracks(ATX)
|
|
- fixed bug on file change(ATX)
|
|
- added red signal(near motor signal on top/left) if write cache not written
|
|
- improved SIO highspeed and fixed write problem
|
|
- added support for HX8347I displays
|
|
|
|
v0.9:
|
|
- added a tape pause function
|
|
- prevent hang on restore images
|
|
- fixed display bug on insert image
|
|
- hold scrolling filename on begin and end
|
|
- ATX:
|
|
- corrected FDC status on missing sector
|
|
- fixed bug in long sector handling
|
|
- bugfixes for weak sector handling
|
|
- fixed wrong sector size on errors
|
|
- fixed an overflow for second drive
|
|
|
|
v0.8:
|
|
- drive motor simulation
|
|
- support for timing based sector access on ATX files
|
|
- some more fixes in ATX file handling
|
|
- added support for ILI9340 display
|
|
|
|
v0.7:
|
|
- fixed error in FileFind function
|
|
- fixed scrolling issue on tape- and debug page
|
|
- more sio highpeed fixes
|
|
- support variable block length on FUJI tape files
|
|
- added turbo tape function with 1000 baud
|
|
- show files with unknown extension darker
|
|
- added touchscreen calibration
|
|
- changed colors for more contrast
|
|
|
|
v0.6:
|
|
- added support for save and restore inserted drive images in EEPROM
|
|
- config option to set first boot drive to D1:
|
|
- internal button structures reorganized to save more RAM
|
|
- fixed wrong calculation of SIO highspeed rates
|
|
- added tape emulation support
|
|
- more retries for SD card init
|
|
- added weak bit handling for ATX files
|
|
|
|
v0.5:
|
|
- added support for CAS-Files(only raw binary, not such with FUJI header!)
|
|
- fixed bug on file view function(sdrive control) after usage of display
|
|
- fixed bug on change back to D0: after use of file view function
|
|
(sdrive control) in other directory
|
|
- fixed wrong error handling during read/write commands(Atari was hanging)
|
|
- ATX Support
|
|
|
|
v0.4:
|
|
- added debug output on sd-card init error
|
|
- more tries for sd-card GO_IDLE_STATE, some cards needs this
|
|
- also more tries for sd-card MMC_SEND_IF_COND
|
|
- added scolling longfilename on headline
|
|
- added actual folder output on status line
|
|
- added support for ILI9329 and HX8347G displays
|
|
- read display id(if necessary)
|
|
- rotate 180° function
|
|
- fixed bug in scroll function of outbox
|
|
- added graphical output for eeprom_writer
|
|
- fixed wrong frequency base for delays
|
|
- added config page and store values in eeprom
|
|
- wait for button release, otherways config buttons are bouncing
|
|
|
|
v0.3:
|
|
- fixed read config from sdrive control
|
|
- made the command line interrupt driven for more stable communication
|
|
- added SIO debug mode
|
|
- some enhancements on the font
|
|
- fixed bug in file create, if next dir sector needed
|
|
|
|
v0.2:
|
|
- added drive deactivation function
|
|
- improved text output(scrolling, max. length)
|
|
- added page/file counter
|
|
- some bugfixes and optimizations
|
|
|
|
v0.1:
|
|
- ported to arduino UNO
|
|
- added TFT-Touchscreen support
|
|
- removed debugloader(can be done via Display now)
|
|
- removed bootloader(easy update via arduino USB and avrdude)
|
|
- removed write protection and card detect, not wired on arduino(shield)
|